What hydro jetting is
Hydro jetting sends water at high pressure through a flexible hose with a special nozzle. The nozzle blasts jets of water outward against the pipe wall and pulls itself along the line, so the whole inside of the pipe is scoured, not just a channel down the middle. When the job is done the line is close to its full diameter again, which is why a jetted drain stays clear longer than one that was only cabled.
When we use it
We reach for hydro jetting when the problem is a coating or a buildup that a cable leaves behind. The common cases are:
- Grease. Kitchen lines and restaurant drains where fat has hardened on the pipe wall.
- Roots. Fine roots packed into joints along a sewer lateral.
- Scale and sludge. Old iron and galvanized lines that have narrowed from the inside.
- Clogs that keep coming back. A line that clears and then slows again within weeks.
- Before a camera inspection. A clean line lets the camera see the pipe wall, so the recording shows real damage and not debris.
Hydro jetting or snaking?
A cable, often called a snake, opens a path through a single clog. It is the right tool for a stoppage in one fixture, and it is quick. Hydro jetting is a different job: it cleans the pipe itself. If you want one clog cleared, cable is usually enough. If the line is coated with grease, packed with roots or keeps backing up, jetting is the better choice because it removes what keeps causing the clog. We explain the difference on our drain cleaning page and choose based on what the camera shows, not on habit.
Why the camera comes first
High-pressure water suits a sound pipe. An old line can be cracked, offset, collapsed or made of a soft material, and a pipe in that state needs repair, not more pressure. So we look at the line with a sewer camera first and pick the method that fits the pipe; what a sewer camera inspection shows explains what we are looking for. If the picture shows a failed section, we go over sewer repair with you instead, and a camera is how we confirm a line is clean afterward when the job calls for it.
Homes and restaurants
In houses, jetting is most often used on a main sewer line that backs up repeatedly; see main sewer line clogs for the signs. In restaurants and commercial kitchens, grease is the constant enemy, and regular jetting keeps lines moving between visits. It works alongside a working grease trap, not in place of one; see grease trap plumbing and restaurant plumbing.
About Friendly Services
We are based at 773 W A Street in Hayward and have worked the East Bay for over 20 years, and we send plumbers anywhere in the Bay Area out to Sacramento and Folsom. Our plumbers hold CSLB #1156315, and our own work has a five-year workmanship warranty. Estimates are free; call (510) 626-9773 any hour.